Automatic Transfer Switches

Automatic Transfer Switches (ATS) are designed in accordance with IEC/EN 60947-2 and CE standards and fulfill transferring functions between network and Generator.When the Network Voltage is interrupted, ATS put the Generator into the service and provides the feeding of the system through Generator. When the Network Voltage comes back, ATS deactivates the Generator and put the Network into service

Main Features

18.1) Automatic Transfer Switches with MCCB

• It makes automatic transfering between Generators and Networks
• It consists of 4 poles Generator MCCB and Network MCCB
• Rating From 100A to 800A
• 750 V AC Rated Insulation Voltage
• 8kV Rated Impulse Withstand Voltage
• Over load, short circuit, low voltage protection functions
• 36kA Icu Rated Ultimate Short-Circuit Breaking Capacity
• Three phase monitoring of I-main power source
• Mains(I) and Alternative (II) source available LED indicator
• 2 Mains(I) and Alternative (II) power ON/OFF status LED indicator

18.2) Motorized Automatic Transfer Switches

• It makes automatic transfering between Generators and Networks
• Rating From 100A to 3200A
• 690 V AC Rated Insulation Voltage
• 8kV Rated Impulse Withstand Voltage
• Mains(I) and Alternative (II) source available LED indicator
• Mains(I) and Alternative (II) power ON/OFF status LED indicator
• Three phase monitoring of I-main power source
• Passive fire-linkage function (forced 0 position)
• Generator start/stop control terminals

18.3) Automatic Transfer Switches with MCB

• It makes automatic transfering between Generators and Networks
• It consists of 4 poles Generator MCCB and Network MCCB
• Rating From 32A to 63A
• 6 kA Icu Rated Ultimate Short-Circuit Breaking Capacity
• Mains(I) and Alternative (II) source available LED indicator
• 2 Mains(I) and Alternative (II) power ON/OFF status LED indicato